Sunrise Medical EIT3 Quickie Ti Titanium Wheelchair

The Sunrise Medical Quickie Ti Titanium ultra lightweight wheelchair is the latest addition to Quickie 's family of ultra-lightweight rigid wheelchairs, and the absolute lightest wheelchair available in the market today. Using lightweight titanium tubing, a minimalist design, and several patented features, Quickie engineers have succeeded in developing the perfect balance between form and function. With a wheelchair weight averaging between 15 and 17 lbs., the Sunrise Medical Quickie Ti Titanium wheelchair is the lightest choice for today's active user.

---

What's Included

• Free Shipping for Orders over $99
• No Assembly Required
• Limited Lifetime Warranty

---

Features

• The new Quickie Ti Titanium chair is distinctly different from the Quickie (GPV) Ti Titanium. Its mono-tube construction and reduced weight creates a fresh concept in titanium chair design. The Quickie (GPV) Ti Titanium chair is now referred to as the "Quickie GPV Titanium".
• The rear axle features 4" of center-of-gravity adjustment in 1/2" increments. When a chair is not properly centered, it feels heavy, unresponsive, and sometimes "tippy". By using a 4" adjustment range that accommodates many different body types, this problem can be avoided.
• The Quickie Ti Titanium features new fold-down push handles. Push handles sometimes act like fish hooks when pulling a chair out of storage. In contrast, fold-down push handles allow the chair to slide out without hooking everything else.
• A special flat area on the axle-sleeve nut corrects toe-in and toe-out in three easy steps: Loosen the camber tube. Place a square against the flat area on the axle-sleeve nut and the ground. Re-tighten the camber tube. The wheels are now aligned.
• The axle plate features 3" vertical adjustment in 1/2" increments. This provides plenty of space to adjust wheel sizes, seat height and seat angle.
• The rear camber tube is secured to the axle plate with a special compression axle sleeve. The axle sleeve is held together with Torx head screws. This advanced hardware is superior in design and holding power. A special tool kit containing Torx wrenches ships with the chair.

Built to meet the requirements of HCPCS code:	K0005
Product Weight:	Approx. 15 - 20 lbs.
Product Width:	13 in. - 18 in. seat width
Product Length/Depth:	14 in. - 19 in. seat depth
Product Height:	16 in. - 20 in. seat to floor
Shipping Dimensions (box 1):	31"w X 24"h X 24"d
Product Weight Capacity:	250 lbs.
Overall Width	19 in. - 31 in.
Caster Options	3 in., 4 in., 5 in.
Rear Wheel Options	24 in., 24 in. heat treated, 26 in., 26 in. heat treated
Axle Options	Standard stainless-steel, optional Titanium, and quad-release axle nuts

---

Wheelchair Measuring Guide

---

---