EasyStand Zing MPS Size 2 Gas Spring Lift

Pictures May Show Upgrades

Downloads: Zing Owner’s Manual.pdf; EasyStand Mini Product Catalog.pdf; Funding Guide.pdf; Zing Advantage Product Catalog.pdf; Range of Motion Chart.pdf; Standing Log.pdf; Zing Sample LMN.docx

EasyStand (Model: PB5500)

What's Included: Four Swivel Locking Casters; Foot Operated Gas Spring; Mast Receiver with Prone Position Lockout

Fits individuals from 40-60″ and up to 154 lbs. The EasyStand Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. The Zing MPS size 2 base is available with Gas Spring Lift or Pow’r Up Lift.

The EasyStand Zing MPS Size 2 with Gas Spring Lift is a larger version of the Zing MPS size 1. The Zing MPS provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use.

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS size 2 is a comfortable 31″ from the floor surface.

Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.

Basic Unit

Imperial

Metric

Height Range

40” to 60”

102 to 152 cm

User Weight Limit

154 lbs.

70 kg

Transfer Height (Horizontal Position)

31”

79 cm

Center of Hip to Footplate Range, Maximum, may invert footplates as necessary

34”

86 cm

Upper Body Support, Vertical Adjustment Range (7 settings)

6”

15 cm

Approximate Equipment Weight of basic unit, in a minimally equipped usable configuration, less most options

82 lbs

37 kg

Approximate Equipment Maximum Weight, Fully optioned unit

145 lbs.

66 kg

Frame footprint, Caster-to-caster

26.75” x 39.75”

68 x 101 cm

Maximum Dimensions

28.75” x 41.75”

73 x 106 cm

Upholstery

Black nylon/ Neoprene or Molded Urethane

Hygienic Covers

Polyurethane Laminate ECO-PUL

Multiple Patterns Available, see literature or website

Frame color

Green, Purple, Orange, or White, Medium Gloss Polyester Powder Coat

Casters and Wheels

3’’ diameter

8cm diameter

Lifting Mechanisms Available

Gas Spring

Pow’r Up (Electric)

Lift Options, if equipped with Gas Spring

Dual Control (hand lever)

Lockout Knob

Options and Accessories

Supine positioning/ “Prone-Forward” positioning. Supine, MPS, TT.

Supine 0-90 degrees/ Prone 0 to 20 degrees forward

Positioning, Prone Model

90 (vertical) to 0 (horizontal)

Leg Abduction

Up to 30 degrees per side

Feet

Foot straps – length over arch

10”

25 cm

15”

38 cm

21”

53 cm

Secure Foot straps – length over arch

Available in same lengths as regular foot straps

Footplate Options L x W

7.75” x 3.25”

20 x 8 cm

9.75” x 4”

25 x 10 cm

11.75” x 5”

30 x 13 cm

Footplate, platform style

11.5” L x 16.75” W

29 x 43 cm

Multi-Adjustable footplates – Plantar/Dorsi

+/- 20 degrees

Multi-Adjustable footplates – Fore/Aft

+/- 0.75”

+/- 2 cm

Multi-Adjustable footplates rotation

30 degrees left/right

Knees

One-piece Calf Pad / Leg Rest

17.5” x 5.5”

44 x 14 cm

One-piece Calf Pad Strap, Fits Approximate circumference

28” to 38”

71 to 97 cm

Kneepad Depth Range (from seat plane)

From tight against plane to +7”

Tight to +18 cm

Kneepad Options, Inside Width

3.25”

8 cm

4.25”

11 cm

5”

13 cm

Kneepad Dimensions (Height x Outside Width)

3.25

4” x 4”

10 x 10 cm

4.25

4.5” x 5”

11 x 13 cm

5” x 6”

13 x 15 cm

Multi-Adjustable Kneepads Width Range

From tight together to 17.25” outside-to-outside

Tight to 44 cm

Multi-Adjustable Kneepads Height Range

Infinite from footplate to pelvic pad

Calf (Behind knee) Pad Option

· 4.5”

· 5.5”

· Fore/Aft Adjustment from seat plane

4.5 x 4.5 inches

5.5 x 5.5 inches

+3” / -2”

11.5 x 11.5 cm

14 x 14 cm

+8 cm / -5 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pads

3 sizes

9” H x 7.5” W

12” H x 7.5” W

15” H x 7.5” W

23 x 19 cm

30 x 19 cm

38 x 19 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap.

Fits approximate circumference:

19”

48 cm

Table / Tray

Posterior Support Models (Supine, MPS, TT)

Shadow Tray size Molded/Acrylic

21” x 24”

53 x 61 cm

Basic Shadow Tray Height Range, referenced from hip pivot:

+4” to +7”

+10 to +18 cm

Basic Shadow Tray Fore/Aft range (from posterior pad to chest pad)

0.5” to 12.5”

1 to 32 cm

Note: Form-to-Fit Upper Body Supports, Lateral Configuration, and Tray Elbow Pads may reduce tray ranges or introduce interferences. A demo or fitting is always recommended when specifying a highly configured product.

Swing Away Tray Height Range, referenced from hip pivot:

+4” to +7”

+10 to +18 cm

Swing Away Tray Fore/Aft Range (from posterior pad to chest pad)

4” to 16”

10 to 41 cm

Swing Away Tray Angle Adjust Range

-90 to +90 Degrees

Chest Pad, Tray Mounted

3” H x 8” W

8 x 20 cm

Elbow (Cutout) Tray Pads

– Inside Width

9.25”

11”

13”

23 cm

28 cm

33 cm

Upholstery/ Positioning Options/ Specs

Hip Supports

Hip support pad size

4.5” x 4”

11 x 10 cm

Hip supports width range

2 sizes

7” to 13”

12” to 18”

18 to 33 cm

30 to 46 cm

Hip Support, TT, Width Range

10” to 16”

25 to 41 cm

Lateral Supports

Lateral support pad size

4” x 6”

10 to 15 cm

Lateral supports width range, Supine & MPS

2 sizes

7” to 11”

10” to 14”

18 to 28 cm

25 to 36 cm

Lateral Supports w/Elbow Stops and/or Arm Rests, Supine and MPS Only.

Width Range including optional pad holes

w/ 11” Wide Pad

w 13” Wide Pad

10” to 17”

12” to 19”

25 to 43 cm

30 to 48 cm

Lateral supports, TT, width range

10” to 16”

25 to 41 cm

Lateral supports, Prone, width range

– 7” wide upper body pads

– 9” wide upper body pads

6.5” to 10”

8.5” to 12”

17 to 25 cm

22 to 30 cm

Lateral supports height range

4”

8” by swapping L/R

10 cm

20 cm

Lateral supports Fore/Aft Range

1”

3 cm

Trunk and Torso Pads

Pelvic Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS

10” H x 11” W

10” H x 13” W

25 x 28 cm

25 x 33 cm

Main Support Pad, TT, Planar

(3 sizes)

19” H x 16” W

22” W x 16” W

25” W x 16” W

48 x 41 cm

56 x 41 cm

64 x 41 cm

Upper Body Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS

8” H x11” W

8” W x 13” W

20 x 28 cm

20 x 33 cm

Prone Pelvic Anterior Support

Planar

Form-to-Fit

10” H x 111” W

10” H x 13” W

10” H x 11” W

10” H x 13” W

25 x 25 cm

25 x 33 cm

25 x 28 cm

25 x 33 cm

Prone Upper Body Anterior Support

Planar

Form-to-Fit

5” H x 7” W

5”H x 9”W 7”H x 7” W 7”H x 9”W 5”H x 12”W 7”H x 12”W 10”H x 13”W

13 x 18 cm

13 x 23 cm 18 x 18 cm 18 x 23 cm 13 x 30 cm 15 x 33 cm 18 x 30 cm 25 x 33 cm

Positioning/Chest Strap (pad size)

6” x 10”

15 x 25 cm

Positioning Strap and Chest Strap Options
Catalog Number	Base Component	Actual Capacity
		Inches	cm
PA3011	A3011	29	74
PT30066	T30066	35	89
PA5610	A3011	29	74
PB5542	T30066	35	89
PA3062	A3062	45	114
PB5592	T30066	35	89
PB5594	A3062	45	114
PB5596	T30066	35	89
PB5598	A3062	45	114

Chest vest – X-Style

11” L x 9.5” W

28 x 24 cm

– X-Style

14.5” L x 10.5” W

37 x 27 cm

-Y Style Vest

17.5” L x 11.5” W

44 x 29 cm

-Y Style Vest

20.5” L x 12.5” W

52 x 32 cm

Posterior Head Support

Head support height range. (From top of upper body pad.)

1” to 10”

2.5 to 25 cm

Head support depth range – from backrest

-3.5” to +1”

-9 to + 2.5 cm

Head Support Options

5” H x 8” W

13 x 20 cm

6” H x 10” W

15 x 25 cm

7” H x 14” W

18 x 36 cm

Form-to-Fit Head Support

Height

Width, variable up to approximately:

5”

10”

13 cm

25 cm

TT Planar Head Support

9” H x 10” W

23 x 25 cm

Anterior Head Support (Face Prompt)

Prone Model Only. 2 pads. Pad Size.

3 W x 9” H

8 x 23 cm

Configurations Available:

Supine (posterior support surfaces)

MPS (Multi-positional Stander, w/Prone Forward optional feature, posterior support surfaces)

TT (Tilt Table, larger posterior upholstery surfaces)

Prone (anterior support surfaces)

* All dimensions are approximate and are subject to change.

Altimate Medical Inc. reserves the right to make changes and improvements as necessary to the product line.

Where critical dimensions are required for proper fitting, please contact Customer Service at Altimate Medical, Inc.

5 Year Limited Warranty

Our service area covers most of Southern California including Los Angeles and surrounding cities.
To see a full list of cities covered in our service area please click here.