EasyStand Zing MPS TT Size 1


Pictures May Show Upgrades

EasyStand (Model: PA5520TT)
What's Included
Four locking swivel casters
Foot operated gas spring
Mast receiver with prone position lockout

The Zing MPS TT (tilt-table style stander) and Zing MPS are capable of supine to prone in one motion, up to 30 degrees of independent leg abduction, and have an available swing-away tray. The MPS TT or tilt-table style features a longer, wider upper body support pad and has the option for padded strapping, rather than individual support and positioning components. That said, with the MPS TT, if more support is needed in specific areas, the same support and positioning components that are available on the MPS can be added to the MPS TT, where needed. The Zing MPS TT is also available in Size 2.

Zing Owner’s Manual.pdf
EasyStand Mini Product Catalog.pdf
Funding Guide.pdf
Zing Advantage Product Catalog.pdf
Range of Motion Chart.pdf
Standing Log.pdf
Zing Sample LMN.docx



The EasyStand Zing MPS TT Size 1 provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use. The TT versions, or tilt-table style standers, feature a longer, wider single pad that provides both pelvic and back support. It also has available padded strapping for those who do not require maximum positioning support, but individual support and positioning components can be added wherever additional support is needed.

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS TT size 1 is a comfortable 32″ from the floor surface.

Remarkably Modular
With over 70 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS TT one of the few multi-position standers that can accommodate contractures on one or both sides.


Basic Unit Imperial Metric
Height Range 20”- 44” 51 cm- 112 cm
Weight Limit 70 lbs. 32 kg
Transfer Height( Horizontal Position ) 32” 81 cm
Center of Pelvic Support to Footplate Range, may invert footplates as necessary 7 to 22” 18 cm- 56 cm
Upper Body Support Height Range 4” 10 cm
Kneepad Depth Range 5” 13 cm
Kneepad Inside Width 2.5”




Kneepad Dimensions
2.5 3.5”x4” 9 x 10 cm
3.25 4”x4” 10 x 10 cm
4.25 4.5”x5” 11 x 13 cm
5.00 5”x6” 13 x 15 cm
Multi-Adjustable Kneepads Width Range, Center-to-center
2.5 4”- 9” 10 – 23 cm
3.25 4.5”- 9” 11 – 23 cm
4.25 5” – 8” 13 – 20 cm
5.00 6” – 7” 15 – 18 cm
Multi-Adjustable Kneepads Height Range +/- 0.75” 2 cm
Weight of basic unit 55 lbs. 25 kg
Frame footprint, Caster-to-caster 20” x 28” 51 x 71cm
Maximum Dimensions 21.5 x 29.5 55 x 75cm
Upholstery Black nylon/ Neoprene or Molded Urethane
Hygienic Covers Polyurethane Laminate ECO-PUL
Frame color Green, Purple, Orange, or White
Casters and Wheels 3’’ diameter 8cm diameter
Lifting mechanisms Available Gas Spring
Lift Options Dual Control (hand lever)

Lockout Knob

Options and Accessories
Supine positioning/  “Prone-Forward” positioning. Supine, MPS, TT. Supine 0-90 degrees/ Prone 20 degrees
Positioning, Prone Model 90 (vertical) to 0 (horizontal)
Positioning, Vertical Model 90 (vertical) only.  Fixed position.
Leg Abduction 30 degrees per side
Foot straps extra small – length over arch 8” 20 cm
10” 25 cm
Secure Foot straps – length over arch Available in same lengths as regular foot straps
Footplate Options LxW 6.00” L x 3.00” W 15 cm L x 8 cm W
7.75” L x 3.25” W 20 cm L x 9 cm W
9.75” L x 4” W 25 cm L x 11 cm W
Footplate, platform style 8.00” Lg x 12.00” W



20 cm L x 30 cm W
Multi-Adjustable footplates – Plantar/Dorsi +/- 20 degrees +/- 20 degrees
Multi-Adjustable footplates – Fore/Aft +/- 0.75”


+/- 2 cm


Multi-Adjustable footplates rotation 30 degrees left/right 30 degrees left/right
Single Calf Pad / Leg Rest 4” x 13.5” 10 x 34 cm
Single Calf Pad Strap, Fits circumference 24” 61 cm
Calf (Behind knee) Pad Option

·         XS Pad Size

·         Small Pad Size

·         Fore/Aft Adjustment from seat plane

3.5 x 3.5 inches

4.5 x 4.5 inches

-1 to +4 inches

9 x 9 cm

11.5 x 11.5 cm

-2.5 to +10 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pads

3 sizes

4” x 6”

6” x 6”

8” x 6”

10 x 15 cm

15 x 15 cm

20 x 15 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap.

Fits circumference:

Up to 15” 38 cm
Table Mount and Tray Options/ Specs Posterior Support Models (Supine, MPS, TT)
Shadow Tray size Molded/Acrylic 11” x 19” 28 cm x 48 cm
Shadow Tray height range 3” 8 cm
Shadow Tray Fore/Aft range (from posterior pad to chest pad) 0” – 10” 0–25 cm
Swing Away Tray size  Molded/Acrylic 11” x 19” 28 cm x 48 cm
Swing Away Tray Height Range 3” 8 cm
Swing Away Tray Fore/Aft Range (from posterior pad to chest pad) 4”- 9” 10 to 23 cm
Swing Away Tray Angle Adjust Range +40 degree inclines to -90 degrees (parallel to user when standing or in supine mode.)
Upholstery/ Positioning Options/ Specs
Hip support pad size 3.5” H x 3.5” W 9cm x 9cm
Hip supports width range 6” – 10” 15-25 cm
Lateral support pad size 3.5” H x 3.5”W 9cm x 9cm
Lateral supports width range

2 sizes

4” to 8”

7” – 11”

10 to 20

18-28 cm

Lateral supports height range 3.5” 9 cm
Lateral supports Fore/Aft Range 1” 3 cm
Pelvic Support Planar (2 sizes)

All Configurations

5x 7”

5x 9”

13cm x 18cm

13cm x 23cm

Pelvic Support, Form-to-Fit (2 sizes)

Posterior support (Supine, MPS, TT)

5x 7”

5x 9”


13cm x 18cm

13cm x 23cm


Pelvic Support Form-to-Fit (2 sizes)

Anterior Support (Prone and Vertical)


5 x 10”

5 x 12”

13cm x 25cm

13cm x 30cm

Upper Body Support Planar 5 x 5” (Anterior only)

5”x 7”

5”x 9”

7 x 7”

7 x 9”

13cm x 13cm

13cm x 18cm

13cm x 23cm

18 x 18 cm

18 x 23 cm

Upper Body Support Form-to-Fit 5” H x 10” W

5” H x 12” W

7” H x 10” W

7” H x 12” W

13cm x 25cm

13cm x 30cm

18cm x 25cm

18cm x 30cm

Upper Body/Pelvic Tilt Table (TT) Pads

3 sizes

14”L x 14”W

16”L x 14”W

18”L x 14”W

36 x 36 cm

41 x 36 cm

46 x 36 cm

Chest Pad 3” H x 8” W 8cm x 20cm
Chest Strap (pad size) 5 x 8” 13 x 20 cm
Chest Strap (approximate user circumference) Up to approx… 24” Up to approx… 61 cm
Chest vest – X-Style 11”L x 9.5”W 28 x 24 cm
Chest vest – X-Style 14.5”L x 10.5”W 37 x 27 cm
Posterior Head Supports (Supine, MPS, TT)
Head support height range. (From top of upper body pad.) 8” 20 cm
Head support depth range – from backrest -2.5” to +1.5” -6 to +4 cm
Head Support Size Extra-Small 5” H x 8” W Cushion 13 cm H x 20 cm W
Head Support Size Small 6” H x 10” W Cushion 15 cm H x 25 cm W
Flat Headrest 5” H x 7” W 13cm x 18cm
Form-to-Fit Head Support


Width, variable up to approximately:





13 cm

25 cm

TT Planar Head Support 8” H x 8.5” W 20 cm H  x 22

cm W

Anterior Head Supports (Prone, Vertical)
Face Aperture 2 – 3 x 9” Pads 8cm x 23cm
Positioning belt – hip circumference Up to approx.. 24”  Up to approx.. 61 cm
Configurations Available:
Supine Posterior Support Pads



MPS (Multi-positional Stander, w/Prone Forward optional feature)
TT (Tilt Table, larger upholstery surfaces)
Prone Anterior Support Pads
Vertical (fixed position, no lift options available)

* All dimensions are approximate and are subject to change.

Altimate Medical Inc. reserves the right to make changes and improvements as necessary to the product line.

Where critical dimensions are required for proper fitting, please contact Customer Service at Altimate Medical, Inc.


  • 5 Year Limited Warranty

Return Policy

We want you to be completely satisfied with your purchase. You may return your purchase within 30 days of receipt - see below for exceptions. To qualify for a return, please note the following:

  • Product must be unused, clean and not damaged
  • Original packaging and materials intact (i.e. instructions, warranty information)
  • Return shipping costs are the responsibility of the customer

Restocking Fees

A 15% restocking fees applies to all returns.

No Returns

There are no returns on the following categories of products:

  • Custom equipment
  • Ultralightweight wheelchairs
  • Sport wheelchairs
  • Handcycles
  • Lift Chairs with custom fabrics and/or heat and massage
  • Bath safety equipment
  • Mattresses
  • Wound care
  • Incontinence
  • Masks
  • Braces
  • Stockings
  • Batteries
  • Orthopedic supplies

Return Process

To return a product, the above conditions must be met. We require that all returns follow these instructions for proper processing:

  1. Call or email to request Return Authorization Number (RA)
  2. Warehouse must receive item within 15 days of an RA# being issued
  3. Report via phone or email a tracking number to customer service
  4. Items sent without an RA number cannot be credited
  5. The buyer is responsible for return postage costs


All credits will be given after receipt and warehouse inspection approval.

Inspect Your Product When It Arrives

Damaged or Defective Products: Please inspect your package when it arrives. If it is defective, damaged or short an item please notify us within 3 business days of delivery. Customer Service toll-free 888-982-8889. If you receive a damaged product we will replace any damaged or defective parts or replace the product at manufacturer's discretion.

Our service area covers most of Southern California including Los Angeles and surrounding cities.
To see a full list of cities covered in our service area please .