EasyStand Zing MPS TT Size 2 Gas Spring Lift


Pictures May Show Upgrades

EasyStand (Model: PB5562)
What's Included
Four Swivel Locking Casters
Foot Operated Gas Spring
Mast Receiver with Prone Position Lockout

Fits individuals from 40-60″ and up to 154 lbs. The EasyStand Zing MPS TT is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. The Zing MPS TT size 2 base is available with Gas Spring Lift or Pow’r Up Lift.

EasyStand Mini Catalog.pdf
2017 Zing Line Catalog.pdf



The EasyStand Zing MPS TT Size 2 with Gas Spring Lift is a larger version of the Zing MPS TT size 1. The Zing MPS TT provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use. The TT versions, or tilt-table style standers, feature a longer, wider single pad that provides both pelvic and back support. It also has available padded strapping for those who do not require maximum positioning support, but individual support and positioning components can be added wherever additional support is needed.

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS TT size 2 is a comfortable 31″ from the floor surface.

Remarkably Modular
With over 70 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS TT one of the few multi-position standers that can accommodate contractures on one or both sides.


Basic Unit Imperial Metric
Height Range 40” to 60” 102 to 152 cm
User Weight Limit 154 lbs. 70 kg
Transfer Height (Horizontal Position) 31” 79 cm
Center of Hip to Footplate Range, Maximum, may invert footplates as necessary 34” 86 cm
Upper Body Support, Vertical Adjustment Range (7 settings) 6” 15 cm
Approximate Equipment Weight of basic unit, in a minimally equipped usable configuration, less most options 82 lbs 37 kg
Approximate Equipment Maximum Weight, Fully optioned unit 145 lbs. 66 kg
Frame footprint, Caster-to-caster 26.75” x 39.75” 68 x 101 cm
Maximum Dimensions 28.75” x 41.75” 73 x 106 cm
Upholstery Black nylon/ Neoprene or Molded Urethane
Hygienic Covers Polyurethane Laminate ECO-PUL

Multiple Patterns Available, see literature or website

Frame color Green, Purple, Orange, or White, Medium Gloss Polyester Powder Coat
Casters and Wheels 3’’ diameter 8cm diameter
Lifting Mechanisms Available Gas Spring

Pow’r Up (Electric)

Lift Options, if equipped with Gas Spring Dual Control (hand lever)

Lockout Knob

Options and Accessories
Supine positioning/  “Prone-Forward” positioning. Supine, MPS, TT. Supine 0-90 degrees/ Prone 0 to 20 degrees forward
Positioning, Prone Model 90 (vertical) to 0 (horizontal)
Leg Abduction Up to 30 degrees per side
Foot straps – length over arch 10” 25 cm
15” 38 cm
21” 53 cm
Secure Foot straps – length over arch Available in same lengths as regular foot straps
Footplate Options L x W 7.75” x 3.25” 20 x 8 cm
9.75” x 4” 25 x 10 cm
11.75” x 5” 30 x 13 cm
Footplate, platform style


11.5” L x 16.75” W


29 x 43 cm
Multi-Adjustable footplates – Plantar/Dorsi +/- 20 degrees +/- 20 degrees
Multi-Adjustable footplates – Fore/Aft +/- 0.75”


+/- 2 cm


Multi-Adjustable footplates rotation 30 degrees left/right 30 degrees left/right
One-piece Calf Pad / Leg Rest 17.5” x 5.5” 44 x 14 cm
One-piece Calf Pad Strap, Fits Approximate circumference 28” to 38” 71 to 97 cm
Kneepad Depth Range (from seat plane) From tight against plane to +7” Tight to +18 cm
Kneepad Options, Inside Width 3.25” 8 cm
4.25” 11 cm
5” 13 cm
Kneepad Dimensions (Height x Outside Width)
3.25 4” x 4” 10 x 10 cm
4.25 4.5” x 5” 11 x 13 cm
5 5” x 6” 13 x 15 cm
Multi-Adjustable Kneepads Width Range From tight together to 17.25” outside-to-outside Tight to 44 cm
Multi-Adjustable Kneepads Height Range Infinite from footplate to pelvic pad
Calf (Behind knee) Pad Option

·         4.5”

·         5.5”


·         Fore/Aft Adjustment from seat plane

4.5 x 4.5 inches

5.5 x 5.5 inches


+3” / -2”

11.5 x 11.5 cm

14 x 14 cm


+8 cm / -5 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pads

3 sizes

9” H x 7.5” W

12” H x 7.5” W

15” H x 7.5” W

23 x 19 cm

30 x 19 cm

38 x 19 cm

Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap.

Fits approximate circumference:

19” 48 cm
Table / Tray Posterior Support Models (Supine, MPS, TT)
Shadow Tray size Molded/Acrylic 21” x 24” 53 x 61 cm
Basic Shadow Tray Height Range, referenced from hip pivot: +4” to +7” +10 to +18 cm
Basic Shadow Tray Fore/Aft range (from posterior pad to chest pad) 0.5” to 12.5” 1 to 32 cm

Note:  Form-to-Fit Upper Body Supports, Lateral Configuration, and Tray Elbow Pads may reduce tray ranges or introduce interferences.  A demo or fitting is always recommended when specifying a highly configured product.


Swing Away Tray Height Range, referenced from hip pivot: +4” to +7” +10 to +18 cm
Swing Away Tray Fore/Aft Range (from posterior pad to chest pad) 4” to 16” 10 to 41 cm
Swing Away Tray Angle Adjust Range -90 to +90 Degrees
Chest Pad, Tray Mounted 3” H x 8” W 8 x 20 cm
Elbow (Cutout) Tray Pads

–          Inside Width






23 cm

28 cm

33 cm

Upholstery/ Positioning Options/ Specs
Hip Supports
Hip support pad size 4.5” x 4” 11 x 10 cm
Hip supports width range

2 sizes

7” to 13”

12” to 18”

18 to 33 cm

30 to 46 cm

Hip Support, TT, Width Range 10” to 16” 25 to 41 cm
Lateral Supports
Lateral support pad size 4” x 6” 10 to 15 cm
Lateral supports width range, Supine & MPS

2 sizes

7” to 11”

10” to 14”

18 to 28 cm

25 to 36 cm

Lateral Supports w/Elbow Stops and/or Arm Rests, Supine and MPS Only.

Width Range including optional pad holes

w/ 11” Wide Pad

w 13” Wide Pad




10” to 17”

12” to 19”



25 to 43 cm

30 to 48 cm

Lateral supports, TT, width range 10” to 16” 25 to 41 cm
Lateral supports, Prone, width range

–          7” wide upper body pads

–          9” wide upper body pads


6.5” to 10”

8.5” to 12”


17 to 25 cm

22 to 30 cm

Lateral supports height range 4”

8” by swapping L/R

10 cm

20 cm

Lateral supports Fore/Aft Range 1” 3 cm
Trunk and Torso Pads
Pelvic Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS


10” H x 11” W

10” H x 13” W

25 x 28 cm

25 x 33 cm

Main Support Pad, TT, Planar

(3 sizes)


19” H x 16” W

22” W x 16” W

25” W x 16” W

48 x 41 cm

56 x 41 cm

64 x 41 cm

Upper Body Support, Planar and Form-to-Fit

(2 sizes each)

Supine / MPS

8” H x11” W

8” W x 13” W

20 x 28 cm

20 x 33 cm

Prone Pelvic Anterior Support






10” H x 111” W

10” H x 13” W

10” H x 11” W

10” H x 13” W


25 x 25 cm

25 x 33 cm

25 x 28 cm

25 x 33 cm

Prone Upper Body Anterior Support










5” H x 7” W

5”H x 9”W 7”H x 7” W 7”H x 9”W 5”H x 12”W 7”H x 12”W 10”H x 13”W


13 x 18 cm

13 x 23 cm 18 x 18 cm 18 x 23 cm 13 x 30 cm 15 x 33 cm 18 x 30 cm 25 x 33 cm

Positioning/Chest Strap (pad size) 6” x 10” 15 x 25 cm
Positioning Strap and Chest Strap Options
Catalog Number Base Component Actual Capacity
Inches cm
PA3011 A3011 29 74
PT30066 T30066 35 89
PA5610 A3011 29 74
PB5542 T30066 35 89
PA3062 A3062 45 114
PB5592 T30066 35 89
PB5594 A3062 45 114
PB5596 T30066 35 89
PB5598 A3062 45 114
Chest vest – X-Style 11” L x 9.5” W 28 x 24 cm
                  – X-Style 14.5” L x 10.5” W 37 x 27 cm
                    -Y Style Vest 17.5” L x 11.5” W 44 x 29 cm
                    -Y Style Vest 20.5” L x 12.5” W 52 x 32 cm
Posterior Head Support
Head support height range. (From top of upper body pad.) 1” to 10” 2.5 to 25 cm
Head support depth range – from backrest -3.5” to +1” -9 to + 2.5 cm
Head Support Options 5” H x 8” W 13 x 20 cm
6” H x 10” W 15 x 25 cm
7” H x 14” W 18 x 36 cm
Form-to-Fit Head Support


Width, variable up to approximately:





13 cm

25 cm

TT Planar Head Support 9” H x 10” W 23 x 25 cm
Anterior Head Support (Face Prompt)
Prone Model Only.  2 pads.  Pad Size. 3 W x 9” H 8 x 23 cm
Configurations Available:

Supine (posterior support surfaces)

MPS (Multi-positional Stander, w/Prone Forward optional feature, posterior support surfaces)

TT (Tilt Table, larger posterior upholstery surfaces)

Prone (anterior support surfaces)

* All dimensions are approximate and are subject to change.

Altimate Medical Inc. reserves the right to make changes and improvements as necessary to the product line.

Where critical dimensions are required for proper fitting, please contact Customer Service at Altimate Medical, Inc.


  • 5 Year Limited Warranty

Return Policy

We want you to be completely satisfied with your purchase. You may return your purchase within 30 days of receipt - see below for exceptions. To qualify for a return, please note the following:

  • Product must be unused, clean and not damaged
  • Original packaging and materials intact (i.e. instructions, warranty information)
  • Return shipping costs are the responsibility of the customer

Restocking Fees

A 15% restocking fees applies to all returns.

No Returns

There are no returns on the following categories of products:

  • Custom equipment
  • Ultralightweight wheelchairs
  • Sport wheelchairs
  • Handcycles
  • Lift Chairs with custom fabrics and/or heat and massage
  • Bath safety equipment
  • Mattresses
  • Wound care
  • Incontinence
  • Masks
  • Braces
  • Stockings
  • Batteries
  • Orthopedic supplies

Return Process

To return a product, the above conditions must be met. We require that all returns follow these instructions for proper processing:

  1. Call or email to request Return Authorization Number (RA)
  2. Warehouse must receive item within 15 days of an RA# being issued
  3. Report via phone or email a tracking number to customer service
  4. Items sent without an RA number cannot be credited
  5. The buyer is responsible for return postage costs


All credits will be given after receipt and warehouse inspection approval.

Inspect Your Product When It Arrives

Damaged or Defective Products: Please inspect your package when it arrives. If it is defective, damaged or short an item please notify us within 3 business days of delivery. Customer Service toll-free 888-982-8889. If you receive a damaged product we will replace any damaged or defective parts or replace the product at manufacturer's discretion.

Our service area covers most of Southern California including Los Angeles and surrounding cities.
To see a full list of cities covered in our service area please .