Hill Rom NP100 Pressure Prevention Mattress


Pictures May Show Upgrades

NP100 Brochure
Hill-Rom (Model: NP100)
Price: $792.00

This foam mattress has a pliable surface for enhanced comfort and ulcer pressure prevention.

Total: $

Key Specs

Weight Weight Capacity Dimentions
Weight 21 lbs Weight Capacity 350 lbs Dimentions 36" x 80"


When it comes to hospital beds, one of the most abhorred effects that they can leave on a patient is placing additional pressure on ulcer incidence. The Hill Rom NP100 Prevention mattress solves these issues by incorporating features that reduce this pressure. The non-powered surface is perfect for patients that strive to maintain the integrity of their skin. And, with our advanced design, patients can prevent these pressure ulcers before they become a lingering issue.

Hill-Rom NP100

Hill-Rom NP100 Features:

  • Shear liner and bidirectional stretch ticking help minimize shear and friction and provide added patient comfort
  • Reinforced and ergonomically designed handles allow for easy maneuvering of the mattress
  • Polyurethane coated ticking, RF welded seams, and an inside flap protect the mattress from fluid penetration
  • Anti-skid bottom helps keep the mattress in place on the sleep deck
Anti-skid bottom Protects surface from sliding on sleep deck Keeps surface in place when patients are pulled up in bed or during egress.
Three-sided slider zip and inside flap Allows access to mattress components and removal of ticking. The design and location of the zipper were chosen to minimize risks to patient and caregiver. The head of the bed is area least likely to come into patient and fluid contact. The horseshoe design allows enough access to inspect the mattress (surface top and bottom) and allows for easy ticking replacement. Inside flaps provide additional protection from fluids.
Two handles Reinforced handles with locking stitch, “X” pattern bar tack are attached to one side of the mattress. (Not included on integrated surfaces.) Ergonomically designed to allow one person to carry and maneuver the mattress.
RF welded seams Radio frequency sealing is used in the manufacturing process prevent fluid penetration. Stitchless, smooth seams also reduce the weight of the mattress by the absence of thread and the tolerance reducing the amount of fabric Prevents fluid penetration.
35.5″ width Width eliminates gaps between frames and side rails. The width allows the surface to fit on a majority of flat deck frames as well as Stryker frames. Width meets HBSWguidelines with many Hill-Rom®frames.
Fire barrier Meets fire safety standards Cal 129, CPSC16CFR1633 and Boston I-XII. Added safety assurance and Meets Federal and State Fire Codes.
Multi-zoned high-density foam ILD 11/23/17 foot/seat/head, density 1.9,VersaCare®ILD 8 and 11/20/20 heel/ foot/seat/head, density 1.9. Construction matches the body’s proportional differences thereby maximizing redistribution. Addresses the individual needs of the head, sacral and foot and heel areas. Supports up to 350 lbs on standard surfaces and 500 lbs on specialty surfaces.
Antimicrobial-treated foam Antimicrobial treated foam protects the foam from the growth of odor-causing microbes Provides additional protection from odor-causing bacteria, mold or mildew
Screen printing and foot indicator Provides orientation. Quick and easy identification of surface, ensures correct handling and placement.
Bi-stretch polyurethane coated ticking Protects the mattress. Soft, durable and easy to clean surface with MVP of 300gm/sqm/24 hrs.
Shear liner Shear liner is added below the ticking and on top of the foam surface to reduce shear forces which cause pressure ulcers. Helps minimize shear and provides added patient comfort.
Manufactured date Embossed year and month surface manufactured. Assists with the facility aging and management of mattresses.

How Pressure Ulcers are Formed and How to Treat Them

Are pressure-relieving mattresses necessary for a patient?

Yes. Patients that are bed-ridden require additional care as they can develop serious sores known as pressure ulcers. Here is a breakdown on what these ulcers are and how you can prevent them using a pressure-relieving mattress, like the Hill Rom NP100 Mattress.

A pressure sore is essentially damage to the skin and the underlying tissue under it. Sitting down or lying for long periods of time will remove the stream of blood to that region, blocking oxygen and crucial supplements from keeping the tissue healthy. At the point when the tissue becomes famished from these supplements for an extended period of time, they will begin to die, causing pressure sores to form.

Pressure sores will likewise be alluded to as pressure ulcers or “decubitus” ulcers. Harm from a pressure sore will go from slight staining of the skin to open injuries that affect deeper areas in the body. This can lead to infection and can lead to serious side effects.

What are the effects?

The affected skin region may feel hotter than the encompassing tissue. In lighter-skinned individuals, the staining may show up as dull purple or red. In darker-skinned individuals, the staining will seem darker than the encompassing tissue.

Is it serious?

A pressure ulcer isn’t just your average sore. It must not be disregarded as it can worsen with neglect. With appropriate treatment, and switching to a pressure relief mattress, such as the Hill Rom NP100 Mattress, these ulcers can recover over time.

A pressure sore is any redness or break in the skin brought about by a large amount of pressure forced onto the body for an extended period of time. The weight keeps blood from traveling to your skin, therefore the skin becomes distressed and eventually dies. Normally, the nerves will send messages of agony or sentiments of distress to your cerebrum to tell you that you have to change your position, yet harm to your spinal cord prevents these messages from reaching your brain, leaving you at the mercy of an ulcer.

You may need to learn better approaches when it comes to changing your position to prevent an excess amount of weight. Pressure wounds can occur for instance, when you sit or lie in one position too long. Shearing is additionally a type of weight damage. It happens when the skin moves one way and the bone underneath it moves another way. An example of this is when you constantly slouch while sitting down.

Another type of injury, an abrasion, can happen when an individual pulls his or herself across a surface as opposed to lifting. This is a case of friction causing harm. Likewise, little exposure to high pressure, for example, a bump or fall, may cause damage to the skin that doesn’t appear right away but is indeed underneath the cells.

How can I correct this?

By learning how to properly position yourself or your patient, you can achieve a sense of balance when it comes to weight distribution. In addition to this, purchasing a pressure-relieving mattress will also assist you in the prevention and treatment of pressure ulcers. Don’t let this be an excuse to disregard proper positioning techniques. The mattress can’t do it on its own. There must be a mutual partnership between positioning and maximizing the mattress’s function.


Dimensions 80″ W x 36″ L x 6″ H
84″ W x 36″ L x 6″ H
Patient weight limit 350 lbs
Weight Approx. 21 lbs
Flammability Cal129, CPSC 16CFR1633, Boston IX-11

Return Policy

We want you to be completely satisfied with your purchase. You may return your purchase within 30 days of receipt - see below for exceptions. To qualify for a return, please note the following:

  • Product must be unused, clean and not damaged
  • Original packaging and materials intact (i.e. instructions, warranty information)
  • Return shipping costs are the responsibility of the customer

Restocking Fees

A 15% restocking fees applies to all returns.

No Returns

There are no returns on the following categories of products:

  • Custom equipment
  • Ultralightweight wheelchairs
  • Sport wheelchairs
  • Handcycles
  • Lift Chairs with custom fabrics and/or heat and massage
  • Bath safety equipment
  • Mattresses
  • Wound care
  • Incontinence
  • Masks
  • Braces
  • Stockings
  • Batteries
  • Orthopedic supplies

Return Process

To return a product, the above conditions must be met. We require that all returns follow these instructions for proper processing:

  1. Call or email to request Return Authorization Number (RA)
  2. Warehouse must receive item within 15 days of an RA# being issued
  3. Report via phone or email a tracking number to customer service
  4. Items sent without an RA number cannot be credited
  5. The buyer is responsible for return postage costs


All credits will be given after receipt and warehouse inspection approval.

Inspect Your Product When It Arrives

Damaged or Defective Products: Please inspect your package when it arrives. If it is defective, damaged or short an item please notify us within 3 business days of delivery. Customer Service toll-free 888-982-8889. If you receive a damaged product we will replace any damaged or defective parts or replace the product at manufacturer's discretion.

Our service area covers most of Southern California including Los Angeles and surrounding cities.
To see a full list of cities covered in our service area please .